The ABS module performs system tests and self-tests during startup and normal operation. The valves, wheel sensors and fluid level circuits are monitored for proper operation. If a fault is found, the ABS will be deactivated and the amber ANTI LOCK light will be lit until the ignition is turned OFF. When the light is lit, the Diagnostic Trouble Code (DTC) may be obtained. Under normal operation, the light will stay on for about 2 seconds while the ignition switch is in the ON position and will go out shortly after.
The Diagnostic Trouble Codes (DTC) are an alphanumeric code and a scan tool, such as Rotunda NGS Tester 007-00500 or its equivalent, is required to retrieve the codes. Refer to the manufacturer-s instructions for operating the tool and retrieving the codes.
The data link connector (DLC) for the ABS is the OBDII connector located under the driver-s side of the instrument panel, underneath the steering column.