Tercel 1995-1996

Wheel Speed Sensors

Print

Removal & Installation



Front Wheel

Specific to:

Toyota Tercel 1995-1996

  1. Disconnect the negative battery cable.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove the fender liner from the front fender.
  6.  
  7. Unplug the speed sensor connectors.
  8.  
  9. Remove the clamp bolts and clip holding the sensor harness.
  10.  
  11. Remove the bolt securing the speed sensor. Remove the speed sensor from the vehicle.
  12.  

To install:

  1. Install the speed sensor. Tighten the bolt to 71 inch lbs. (8 Nm).
  2.  
  3. Tighten the clamp bolts holding the sensor harness to 44 inch lbs. (5 Nm).
  4.  
  5. Install the clip to hold the wire to the frame.
  6.  
  7. Engage the speed sensor connectors.
  8.  
  9. Install the fender liner and install the wheels.
  10.  
  11. Lower the vehicle.
  12.  
  13. Connect the negative battery cable.
  14.  

Rear Wheel

Specific to:

Toyota Tercel 1995-1996

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear seat cushion.
  4.  
  5. Unplug the sensor connector and pull out the sensor wire harness with the grommet.
  6.  
  7. Raise and safely support the vehicle.
  8.  
  9. Remove the clamp bolts securing the sensor wire harness to the control arm.
  10.  
  11. Remove the lockbolt from the axle beam and remove the speed sensor.
  12.  

To install:

  1. Install the speed sensor and tighten the lockbolt to 71 inch lbs. (8 Nm).
  2.  
  3. Install the clamp bolts to hold the sensor wire harness to the control arm. Tighten the bolts to 44 inch lbs. (5 Nm).
  4.  
  5. Lower the vehicle.
  6.  
  7. Engage the speed sensor connector and install the grommet.
  8.  
  9. Install the seat cushion.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo