Tercel 1995-1996

Mirrors

Print

Removal & Installation



  1. Use a suitable prytool covered with tape (to protect the prying surfaces), to carefully pry off the cover. Make sure to pry the cover off in the area shown in the accompanying illustration.
  2.  
  3. Remove the 3 nuts, then remove the mirror assembly. Unplug the electrical connection on power mirrors.
  4.  
  5. Installation is the reverse of the removal procedure. If equipped with power mirrors, cycle the mirror several times to make sure that it works properly.

    Click image to see an enlarged view

    Fig. Carefully pry off the cover in the area shown by the arrow, then remove the 3 mounting nuts

  6.  

 
label.common.footer.alt.autozoneLogo