Tercel 1995-1996

Trunk Lid

Print

Adjustment



Specific to:

Toyota Tercel 1995-1996

  1. For forward/rearward and left/right adjustments, loosen the bolts then move the hood the desired position.
  2.  
  3. For vertical adjustment of the of the lid, increase or decrease the number of washers on the hinges.

    Click image to see an enlarged view

    Fig. For forward/rearward and left/right adjustments, loosen the bolts then move the hood the desired position

  4.  
  5. Adjust the lock and striker by loosening the bolts, then repositioning.

    Click image to see an enlarged view

    Fig. Adjust the lock and striker by loosening the bolts, then repositioning

  6.  

Removal & Installation



Specific to:

Toyota Tercel 1995-1996


CAUTION
On models equipped with an air bag (SRS), work must NOT be started until at least 90 seconds have passed from the time that both the ignition switch is turned to the LOCK position and the negative cable is disconnected from the battery.

  1. Disconnect the negative battery cable.
  2.  
  3. If necessary, disconnect the wire harness from the trunk lid.
  4.  
  5. Matchmark the position of the trunk lid to the hinges.
  6.  
  7. Have an assistant hold the trunk lid, then remove the bolts securing the trunk lid to the hinges.
  8.  
  9. Carefully remove the trunk lid from the vehicle.
  10.  
  11. Installation is the reverse of removal. Adjust as necessary.

    Click image to see an enlarged view

    Fig. Matchmark the position of the trunk lid before removing the attaching bolts

  12.  

 
label.common.footer.alt.autozoneLogo