TownAndCountry 2008

Flexplate (Driveplate)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transaxle. Refer to Automatic Transaxle Assembly, removal & installation.
  4.  
  5. Remove the 8 flexplate attaching bolts (2).
  6.  
  7. Remove the backing plate (3)
  8.  
  9. Remove the flexplate (1).
  10.  

To install:

  1. Position the flexplate (1) with the backing plate (3) on the crankshaft.
  2.  
  3. Apply MOPAR® Lock AND Seal Adhesive to the 8 flexplate bolts.
  4.  
  5. Install the flexplate bolts (2). Tighten the bolts to 70 ft. lbs. (95 Nm).
  6.  
  7. Install the transaxle. Refer to Automatic Transaxle Assembly, removal & installation.

    Click image to see an enlarged view

    Fig. View of flexplate removal/installation

  8.  

 
label.common.footer.alt.autozoneLogo