Toyota 4Runner 2001-06

Crankshaft Position Sensor

Print

Removal & Installation



2RZ-FE & 3RZ-FE Engines


Click image to see an enlarged view

Fig. Remove the alternator bracket to access the Crankshaft Position (CKP) sensor-2RZ-FE engine

  1. Remove the engine under cover.
  2.  
  3. Remove the alternator assembly.
  4.  
  5. Remove the alternator bracket.
  6.  
  7. Detach the Crankshaft Position (CKP) sensor harness connector.
  8.  
  9. Remove the two sensor retaining bolts and remove the sensor.
  10.  
  11. Installation is the reverse of the removal process. Use a new O-ring, lightly coated with engine oil at installation. Tighten the retainer bolts to 74 inch lbs. (8.5 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo