Toyota 4Runner 2001-06

Removal & Installation

Print

  1. Remove the parking brake hole cover.
  2.  
  3. Remove the upper console panel.
  4.  
  5. Remove the center cluster panel.
  6.  
  7. Remove the three screws and pull out the heater control assembly. Disconnect the electrical connectors.
  8.  

To install:

  1. Installation is the reverse order of removal.

    Click image to see an enlarged view

    Fig. Exploded view of the Heater or A/C Control Panel-2001-02 Models

  2.  

  1. Remove the mounting screw and release the four claw fittings.
  2.  
  3. Slide out the control unit, disconnect the electrical connector and remove the assembly.
  4.  

To install:

  1. Installation is the reverse order of removal.

    Click image to see an enlarged view

    Fig. Location of the four claw fittings holding the control panel in place-2003-05 Models

  2.  

 
label.common.footer.alt.autozoneLogo