Toyota 4Runner 2001-06

4.7L V8 - Auto

Print

4.7L V8 - Auto

Trouble Code: P0031



Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit Low Code

Possible Causes:



HO2S-11 heater control circuit is open
 
HO2S-11 heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0032



Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit High Input

Possible Causes:



HO2S-11 heater control circuit is shorted to ground
 
HO2S-11 heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0037



Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Low Input

Possible Causes:



HO2S-12 heater control circuit is open
 
HO2S-12 heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0038



Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit High Input

Possible Causes:



HO2S-12 heater control circuit is shorted to ground
 
HO2S-12 heater assembly is damaged or has failed
 
PCM has failed
 

Trouble Code: P0100



Mass Airflow Sensor Circuit Malfunction

Possible Causes:



MAF sensor signal circuit is open, shorted to ground or power
 
MAF sensor ground circuit is open between sensor and ground
 
MAF sensor power circuit is open (check the power to the relay)
 
MAF sensor has failed, or the PCM has failed
 

Trouble Code: P0101



Mass Airflow Sensor Signal Range/Performance

Possible Causes:



MAF sensor signal circuit is open, shorted to ground or power
 
MAF sensor is contaminated, damaged or it has failed
 
PCM has failed
 

Trouble Code: P0110



Intake Air Temperature Sensor Circuit Malfunction

Possible Causes:



IAT sensor signal circuit is open, shorted to ground or VREF
 
IAT sensor ground circuit is open between sensor and ground
 
IAT sensor is contaminated, damaged or has failed
 
PCM has failed
 

Trouble Code: P0115



Engine Coolant Temperature Sensor Circuit Malfunction

Possible Causes:



IAT sensor signal circuit is open, shorted to ground or VREF
 
ECT sensor ground circuit is open between sensor and ground
 
ECT sensor is contaminated, damaged or has failed
 
PCM has failed
 

Trouble Code: P0116



Engine Coolant Temperature Sensor Range/Performance

Possible Causes:



Check for problems in the cooling system (i.e., coolant, the fan)
 
ECT sensor signal circuit or ground circuit has high resistance
 
ECT sensor is contaminated, damaged or has failed
 
PCM has failed
 

Trouble Code: P0125



Insufficient Coolant Temperature For Closed Loop

Possible Causes:



Check the operation of the thermostat (it may be stuck open)
 
ECT sensor signal circuit has high resistance
 
ECT sensor has failed
 
Inspect for low coolant level for an incorrect coolant mixture
 

Trouble Code: P0128



Thermostat System Malfunction

Possible Causes:



Check the operation of the thermostat (it may be stuck open)
 
ECT sensor is out-of-calibration or skewed
 
Inspect for low coolant level or for an incorrect coolant mixture
 

Trouble Code: P0300



Multiple Cylinder Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or PCV system
 
Base engine mechanical fault that affects two or more cylinders
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Fuel delivery component fault that affects two or more cylinders (e.g., contaminated, dirty or sticking fuel injectors)
 
Ignition system fault (coil or plug) that affects several cylinders
 
Mass airflow meter is contaminated, or its signal is out of range
 

Trouble Code: P0301



Cylinder 1 Misfire Detected

Possible Causes:



Base engine mechanical fault that affects only Cylinder 1
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Fuel component fault that affects only Cylinder 1 (a contaminated or sticking injector)
 
Ignition system problem (coil or plug) that affects Cylinder 1
 

Trouble Code: P0302



Cylinder 2 Misfire Detected

Possible Causes:



Base engine mechanical fault that affects only Cylinder 2
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Fuel component fault that affects only Cylinder 2 (a contaminated or sticking injector)
 
Ignition system problem (coil or plug) that affects Cylinder 2
 

Trouble Code: P0303



Cylinder 3 Misfire Detected

Possible Causes:



Base engine mechanical fault that affects only Cylinder 3
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Fuel component fault that affects only Cylinder 3 (a contaminated or sticking injector)
 
Ignition system problem (coil or plug) that affects Cylinder 3
 

Trouble Code: P0304



Cylinder 4 Misfire Detected

Possible Causes:



Base engine mechanical fault that affects only Cylinder 4
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Fuel component fault that affects only Cylinder 4 (a contaminated or sticking injector)
 
Ignition system problem (coil or plug) that affects Cylinder 4
 

Trouble Code: P0325



Knock Sensor 1 Circuit Malfunction

Possible Causes:



Knock sensor signal circuit is open or shorted to ground
 
Knock sensor signal circuit is shorted to VREF or system power
 
Knock sensor is damaged, not tightened properly or has failed
 
PCM has failed
 

Trouble Code: P0335



Crankshaft Position Sensor 'A' Circuit Malfunction

Possible Causes:



CKP Sensor 'A' signal circuit is open, shorted to ground or shorted to system power
 
CKP Sensor 'A' signal ground circuit is open
 
CKP Sensor 'A' is damaged or has failed
 

Trouble Code: P0340



Camshaft Position Sensor Circuit Malfunction

Possible Causes:



CMP sensor signal circuit is open, shorted to ground or power
 
CMP sensor signal ground circuit is open
 
CMP sensor has failed, or the PCM has failed
 

Trouble Code: P0341



Camshaft Position Sensor 'A' Signal Range/Performance

Possible Causes:



CMP sensor signal circuit is open, shorted to ground or power
 
CMP sensor pulley is damaged, or timing belt has jumped teeth
 
CMP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0420



Catalyst Efficiency Below Normal (Bank 1)

Possible Causes:



Catalytic converter is damaged, contaminated or has failed
 
Front A/FS or rear HO2S is contaminated with fuel or moisture
 
Front A/FS or the rear HO2S is loose in its mounting hole
 
Front A/FS is older (aged) than the rear HO2S (HO2S is lazy)
 
Gas leaks at the exhaust manifold or in the exhaust pipes
 

Trouble Code: P0441



EVAP System Incorrect Purge Flow Detected

Possible Causes:



Charcoal canister is clogged, loaded with fuel or with moisture
 
Fuel tank over-fill check valve cracked or damaged
 
Fuel tank seal leaking, fuel tank cracked or damaged/leaking
 
Fuel vapor hoses/tubes blocked or restricted, or fuel vapor control valve tube or fuel vapor vent valve assembly blocked
 
Vacuum hose or tubing cracked, damaged or disconnected
 
Vapor pressure sensor is damaged or has failed
 
VSV circuit for the canister purge, VSV for the CCV or the VSV for the pressure switching valve is open or shorted to ground
 
VSV for the vapor pressure sensor circuit is open or shorted to ground, or the vapor pressure sensor is damaged or has failed
 

Trouble Code: P0442



EVAP System Small Leak (0.040") Detected

Possible Causes:



Canister Purge valve is damaged, leaking or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Fuel tank is cracked (leaking), or a leak exists in the 'O' ring
 
Fuel tank pressure sensor is damaged or has failed
 
Fuel vapor line(s), fuel pipes or hoses damaged or leaking
 
PCM has failed
 

Trouble Code: P0450



EVAP Vapor Pressure Sensor Circuit Malfunction

Possible Causes:



Vapor pressure sensor signal circuit open or shorted to ground
 
Vapor pressure sensor ground circuit is open
 
Vapor pressure sensor power circuit is open
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0451



EVAP Vapor Pressure Sensor Range/Performance

Possible Causes:



Vapor pressure sensor vacuum hoses loose or damaged
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0452



EVAP Vapor Pressure Sensor Circuit Low Input

Possible Causes:



Vapor pressure sensor connector is damaged or open
 
Vapor pressure sensor circuit is open
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0453



EVAP Vapor Pressure Sensor Circuit High Input

Possible Causes:



Vapor pressure sensor connector is damaged or shorted
 
Vapor pressure sensor circuit is shorted to VREF
 
Vapor pressure sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0456



EVAP System Very Small Leak (0.020") Detected

Possible Causes:



Canister Purge valve is damaged, leaking or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Fuel tank is cracked (leaking), or a leak exists in the 'O' ring
 
Fuel tank pressure sensor is damaged or has failed
 
Fuel tank overfill check valve is cracked or is damaged
 
Fuel vapor line(s), fuel pipes or hoses damaged or leaking
 
PCM has failed
 

Trouble Code: P0503



Vehicle Speed Sensor 'A' Signal Erratic Or Intermittent

Possible Causes:



ABS ECU is damaged or has failed
 
Combination Meter is damaged or has failed
 
VSS signal circuit is open between the meter and the PCM
 
VSS signal circuit shorted to ground between meter and PCM
 

Trouble Code: P0504



Brake Switch 'A' To 'B' Correlation Malfunction

Possible Causes:



Stoplight switch signal circuit is shorted to power
 
Stoplight switch assembly is damaged or shorted
 
PCM has failed
 

Trouble Code: P0560



System Voltage (Backup Power Circuit) Malfunction

Possible Causes:



Battery backup circuit is open between battery and the PCM
 
PCM has failed
 

Trouble Code: P0604



PCM Internal Control Module Random Access Memory Processing Error

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0606



ECM/PCM Processing Error

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0607



Control Module Performance

Possible Causes:



Clear the codes and retest for this code. If the same code resets, substitute a known good control module and retest. If the trouble code is gone, the original PCM has failed.
 

Trouble Code: P0617



Starter Relay Circuit High Input

Possible Causes:



Park/Neutral switch assembly is damaged or it has failed* Ignition switch is damaged or has failed
 
PCM has failed
 

Trouble Code: P1335



Crankshaft Position Sensor Circuit Malfunction

Possible Causes:



CKP sensor (+) circuit is open or shorted to ground
 
CKP sensor (-) circuit is open or shorted to ground
 
CKP sensor (+), (-) circuit is shorted to VREF or system power
 
CKP sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P1520



Stop Light Switch Circuit Malfunction

Possible Causes:



Stop light switch is shorted to ground
 
Stop light switch is damaged or has failed
 
PCM has failed
 

Trouble Code: P1600



PCM Battery Backup Circuit Malfunction

Possible Causes:



Battery backup circuit is open (check EFI fuse and fuse link)
 
Battery terminals are corroded or loose
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo