Toyota Avalon, Camry, Camry Solara 2001-06

Alternator

Print

Removal & Installation



  1. Remove or disconnect the following:

    Negative battery cable
     
    Air intake assembly, if necessary
     
    Engine appearance cover, if necessary
     
    Drive belt from the pulley
     
    Harness and wire (and nut) from the alternator
     
    The two bolts and engine mounting stay if necessary
     
    Alternator
     

  2.  

To install:

  1. Install or connect the following:

    Alternator
     
    Drive belt. Torque the bolts. 2AZ-FE: M8 bolt-15 ft. lbs. (21 Nm); M10 bolt-38 ft. lbs. (52 Nm). 1MZ-FE/3MZ-FE: Pivot bolt-40 ft. lbs. (54 Nm); Lock bolt-14 ft. lbs. (19 Nm). 3.5L (2GR-FE) uses a self-adjusting tensioner.
     
    Wiring
     
    Air intake assembly, if removed
     
    Engine appearance cover, if removed
     
    Negative and starter battery cables

    Click image to see an enlarged view

    Fig. (A) pivot bolt, (B) lock bolt and (C) adjusting bolt

     

  2.  

 
label.common.footer.alt.autozoneLogo