Toyota Avalon, Camry, Camry Solara 2001-06

Driven Disc & Pressure Plate

Print

Removal & Installation





Click image to see an enlarged view

Fig. Clutch component assembly-Camry shown, others similar

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
     
    Remove the transaxle assembly from the vehicle
     
    Clutch pressure plate retaining bolts
     
    Clutch cover
     
    Clutch disc
     
    Retaining clip and bearing from the transaxle
     
    Release fork and boot assembly
     

  4.  

To install:

  1. Install or connect the following:

    Clutch disc onto the flywheel
     
    Clutch cover, aligning the matchmarks
     
    Clutch cover retaining bolts. Bolts, tightened in a crisscross pattern: 14 ft. lbs. (19 Nm).
     
    Boot, release fork, hub and bearing assemblies
     
    Transaxle
     
    Negative battery cable
     

  2.  


    Click image to see an enlarged view

    Fig. Tighten the pressure plate bolts according to the sequence shown-Camry




Click image to see an enlarged view

Fig. Clutch component assembly-Camry shown, Solara similar

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable. On vehicles equipped with an air bag, wait at least 90 seconds before proceeding.
     
    Remove the transaxle assembly from the vehicle
     
    Clutch pressure plate retaining bolts
     
    Clutch cover
     
    Clutch disc
     
    Retaining clip and bearing from the transaxle
     
    Release fork and boot assembly
     

  4.  

To install:

  1. Install or connect the following:

    Clutch disc onto the flywheel
     
    Clutch cover, aligning the matchmarks
     
    Clutch cover retaining bolts. Bolts, tightened in a crisscross pattern: 14 ft. lbs. (19 Nm).
     
    Boot, release fork, hub and bearing assemblies
     
    Transaxle
     
    Negative battery cable

    Click image to see an enlarged view

    Fig. Tighten the pressure plate bolts according to the sequence shown-Camry

     

  2.  

 
label.common.footer.alt.autozoneLogo