Toyota Camry 1983-1996 Repair Guide

Brake Light Switch

Print

REMOVAL & INSTALLATION



  1. Turn the ignition key to the OFF position. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument lower finish panel and the air duct if required to gain access to the stoplight switch.
  4.  
  5. Disconnect the stoplight switch wiring.
  6.  
  7. Remove the switch mounting nut, then slide the switch from the mounting bracket on the pedal.
  8.  

To install:
  1. Install the switch into the mounting bracket and adjust.
  2.  
  3. Engauge the switch connector and reattach the negative battery cable.
  4.  
  5. Depress the brake pedal and verify that the brake lights illuminate.
  6.  
  7. Install the air duct and the lower finish panel, if removed.
  8.  

 
label.common.footer.alt.autozoneLogo