Toyota Camry 1983-1996 Repair Guide

Center Bearing


See Figure 1

Two center support bearings are used on All-Trac 4-Wheel Drive vehicles to control driveshaft noise and vibration and as a means of support for the intermediate driveshaft. The bearings use cushion rubber to bend the driveshaft to allow passage through the center of the bearing. To remove the bearing, refer to Driveshaft Removal and Installation.

Click image to see an enlarged view

Fig. Fig. 1: The center support bearing is attached to the body by two bolts-All-Trac (4WD) models only