Toyota Camry 1983-1996 Repair Guide

Clock

Print

REMOVAL & INSTALLATION



On some models the clock is built into the radio assembly and cannot be removed separately. On all other models proceed with the following.

  1. Disconnect the negative battery cable.
  2.  


CAUTION
Some models covered by this guidemay be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in Chassis Electrical .

  1. Using a small prytool, pry the clock loose from the dash panel. The clock is usually held in the dash panel by 2 small retaining clips.
  2.  
  3. Disconnect the electrical wiring from the rear of the clock and remove the clock.
  4.  
  5. Installation is the reverse of the removal procedure. Check the clock functions for proper operation. Reset the clock.
  6.  

 
label.common.footer.alt.autozoneLogo