Toyota Camry 1983-1996 Repair Guide

Tailgate Lock

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Turn the ignition key to the OFF position. Disconnect the negative battery cable.
  2.  
  3. Remove the back door inside garnish.
  4.  
  5. Remove the link protector.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Tailgate door lock assembly linkage and clip locations

  1. Disconnect the links from the door control and door lock cylinder.
  2.  
  3. Remove the bolts and the door lock control with the solenoid.
  4.  
  5. To remove the door lock cylinder, remove the retaining screws and then remove the cylinder.
  6.  

To install:
  1. Install the door lock cylinder and secure with the retaining screws.
  2.  
  3. Install the bolts and the door lock control with the solenoid.
  4.  
  5. Connect the links to the door control and door lock cylinder.
  6.  
  7. Install the link protector.
  8.  
  9. Install the back door inner garnish.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo