Toyota Camry 1983-1996 Repair Guide

Extension Housing Seal

Print

REMOVAL & INSTALLATION



The following procedure can be accomplished while the transfer case is in the vehicle.

  1. Drain the transaxle oil.
  2.  
  3. Remove the propeller shaft.
  4.  
  5. Drive out the output shaft oil seal using a puller.
  6.  

To install:
  1. Place MP grease on the lip of the seal.
  2.  
  3. Drive in a new seal to a depth of 0.0430.075 inch (1.11.9mm).
  4.  
  5. Install the propeller shaft and fill the transaxle with the proper lubricant.
  6.  

 
label.common.footer.alt.autozoneLogo