Toyota Camry and Avalon 1997-2000

Electric Cooling Fans

Print

REMOVAL & INSTALLATION


Click image to see an enlarged view

Fig. Exploded view of the electric cooling fan-5S-FE engine

Avalon


Click image to see an enlarged view

Fig. View of the electric No.2 cooling fan system-Avalon



Click image to see an enlarged view

Fig. View of the electric No.2 cooling fan system-Avalon

NO.1 COOLING FAN


Click image to see an enlarged view

Fig. View of the No.1 cooling fan

  1. Disconnect the cable at the negative battery terminals.
  2.  
  3. Remove the battery and tray.
  4.  
  5. Detach the cruise control actuator.
  6.  
  7. Disconnect the No.3 relay block from the radiator.
  8.  
  9. Detach the cooling fan connector.
  10.  
  11. Remove the wire clamps from the cooling fan shroud.
  12.  
  13. Remove the cooling fan by removing the two retaining bolts.
  14.  

To install:

  1. Installation is the reverse of removal.
  2.  

no.2 cooling fan


Click image to see an enlarged view

Fig. View of the No.2 cooling fan

  1. Drain the engine coolant.
  2.  
  3. Remove the upper radiator hose from the radiator end.
  4.  
  5. Detach the cooling fan and Engine Coolant Temperature (ECT) switch connectors.
  6.  
  7. Remove the wire connectors from the electric cooling fan housing.
  8.  
  9. Remove the bolts and then the cooling fan.
  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo