Toyota Camry and Avalon 1997-2000

Blower Motor

Print

REMOVAL & INSTALLATION
Camry


Click image to see an enlarged view

Fig. Remove the blower motor by extracting the three (3) mounting screws

  1. Disconnect the negative battery cable. Wait at least 90 seconds to proceed work due to the SRS system.
  2.  
  3. Remove the glove compartment.
  4.  
  5. Detach the blower motor electrical connector.
  6.  
  7. Remove the blower motor by extracting the 3 screws.
  8.  

To install:

  1. Install the blower motor and the tighten the three screws.
  2.  
  3. Attach the blower motor electrical connector.
  4.  
  5. Install the glove compartment.
  6.  

Avalon


Click image to see an enlarged view

Fig. View of the blower motor mounting screws-Avalon



Click image to see an enlarged view

Fig. View of the blower motor direction and wiring harness terminal polarity-Avalon

  1. Disconnect the negative battery cable. Wait at least 90 seconds to proceed work due to the SRS system.
  2.  
  3. Remove the lower No.2 finish panel.
  4.  
  5. Disconnect the blower motor wiring harness connector.
  6.  
  7. Remove the screws and then the blower motor.
  8.  

To install:

  1. Install the blower motor and install the 3 screws.
  2.  
  3. Attach the wiring connector to the blower motor.
  4.  
  5. Install the No.2 lower finish panel.
  6.  
  7. Attach the No.2 under cover.
  8.  

 
label.common.footer.alt.autozoneLogo