Toyota Camry and Avalon 1997-2000

Console

Print

REMOVAL & INSTALLATION


Click image to see an enlarged view

Fig. Detach the center console trim panel cover



Click image to see an enlarged view

Fig. View of the console screw locations

  1. Disconnect the negative battery cable. Wait at least 90 seconds from the time the negative battery was disconnected to start work.
  2.  


CAUTION
Some models covered by this guide may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described in CHASSIS ELECTRICAL .

  1. Remove the floor console upper trim panel to gain access to the mounting screws.
  2.  



Click image to see an enlarged view

Fig. Remove the rear center console retaining bolts

  1. Remove the mounting screws in the front floor console and in the rear console box.
  2.  



Click image to see an enlarged view

Fig. Remove the front center console retaining bolts

  1. Remove the floor console from the vehicle.
  2.  
  3. Reverse the removal procedure to install.
  4.  

 
label.common.footer.alt.autozoneLogo