Toyota Celica 1986-1993 Repair Guide

Fuel Injector Solenoid Resistor

Print

TESTING



2S-E Engine
  1. With the ignition switch off, disconnect the resistor connector.
  2.  
  3. Using an ohmmeter, check the resistance between terminal +B and the other terminals.
  4.  
  5. There should be 2-3 ohms resistance each.
  6.  
  7. If not, replace the resistor.

    Click image to see an enlarged view

    Fig. Fig. 1 Testing injector solenoid resistor2S-E engine shown

  8.  

3S-GTE Engine
  1. With the ignition switch off, disconnect the resistor connector.
  2.  
  3. Using an ohmmeter, check the resistance between terminal +B and the other terminals.
  4.  
  5. There should be 4-6 ohms resistance each.
  6.  
  7. If not, replace the resistor.
  8.  



Click image to see an enlarged view

Fig. Fig. 2 Testing injector solenoid resistor1988-89 3S-GTE engine shown

 
label.common.footer.alt.autozoneLogo