The chassis components are self-contained and therefore require no periodic internal lubrication (no grease fittings). Coat the outside of the ball joints and the steering gear housing with NLGI No. 2 lithium based grease or its equivalent.
MANUAL TRANSAXLE AND CLUTCH LINKAGE
On models so equipped, apply a small amount of chassis grease to the pivot points of the transaxle and clutch linkage.
AUTOMATIC TRANSAXLE LINKAGE
On models so equipped, apply a small amount of 10W engine oil to the kickdown and shift linkage at the pivot points.
PARKING BRAKE LINKAGE
At yearly intervals or whenever binding is noticeable in the parking brake linkage, lubricate the cable guides, levers and linkage with a suitable chassis grease.