Toyota Celica 1986-1993 Repair Guide

Quarter Window Glass

Print

REMOVAL & INSTALLATION



Hatchback
  1. Remove following parts: package tray trim panel, deck trim rear cover, scuff plate.
  2.  
  3. Remove rear seat cushion and back.
  4.  
  5. Remove speaker grille.
  6.  
  7. Remove deck trim side panel, removing the cover and the seat back striker, the service hole cover, and the jack cover and plugs.
  8.  
  9. Remove front shoulder belt anchor and guide.
  10.  
  11. Remove quarter trim panel by removing the seat back hinge, screw, then pry out the clips.
  12.  
  13. Remove center pillar inner garnish.
  14.  
  15. Remove rear shoulder belt anchor and guide.
  16.  
  17. Remove assist grip and roof side inner garnish.
  18.  
  19. Remove quarter window glass molding.
  20.  
  21. Remove quarter window glass:
    1. Remove 3 upper retainers.
    2.  
    3. Remove the 3 lower side nuts and 2 front side nuts.
    4.  
    5. Using a knife, cut loose the adhesive.
    6.  
    7. Remove the glass, being careful not to damage the body.
    8.  

  22.  

To install:

  1. Clean the body and the glass with cleaner.
  2.  
  3. Install the quarter window glass:
    1. Apply primer according to manufacturer's instructions.
    2.  
    3. Install the seal to the glass.
    4.  
    5. Install the glass to the body with the retainers.
    6.  

  4.  
  5. Install the roof side inner garnish and assist grip.
  6.  
  7. Install the rear shoulder belt anchor and guide, torquing the retainer to 32 ft. lbs. (43 Nm).
  8.  
  9. Install the center pillar inner garnish and quarter trim panel.
  10.  



Click image to see an enlarged view

Fig. Fig. 1 Removing quarter window glass1986-89 Hatchback shown



Click image to see an enlarged view

Fig. Fig. 2 Removing quarter window glass1990-93 Hatchback shown

  1. Install the front shoulder belt anchor and guide, torquing the retainer to 32 ft. lbs. (43 Nm).
  2.  
  3. Install the remaining parts to complete installation.
  4.  

Coupe
  1. Remove scuff plate.
  2.  



Click image to see an enlarged view

Fig. Fig. 3 Removing quarter window glass1986-89 Coupe shown



Click image to see an enlarged view

Fig. Fig. 4 Removing quarter window glass1990-93 Coupe shown

  1. Remove rear seat back and cushion.
  2.  
  3. Remove rear floor mat setting plate with floor mat.
  4.  
  5. Remove quarter trim molding.
    1. Remove the cover, seat back striker and hinge.
    2.  
    3. Remove the speaker grille, if equipped.
    4.  
    5. Remove the screws and pry out the clips.
    6.  

  6.  
  7. Remove front shoulder belt anchor and guide.
  8.  
  9. Remove quarter trim panel:
    1. Remove the cover and seat back striker.
    2.  
    3. Remove the seat back hinge.
    4.  
    5. Remove the screw and pry out the clips.
    6.  
    7. Remove the quarter trim panel.
    8.  

  10.  
  11. Remove center pillar inner garnish.
  12.  
  13. Remove rear shoulder belt anchor and guide.
  14.  
  15. Remove assist grip and roof side inner garnish.
  16.  
  17. Remove quarter ventilation louver.
  18.  
  19. Remove quarter window molding.
  20.  
  21. Remove quarter window glass, removing 2 lower side nuts and 2 front side nuts. Using a knife, cut loose the adhesive. Remove the glass, being careful not to damage the body.
  22.  

To install:

  1. Clean the body and the glass with cleaner.
  2.  
  3. Install the quarter window glass:
    1. Apply primer according to manufacturer's instructions.
    2.  
    3. Install the seal to the glass.
    4.  
    5. Install the glass to the body with the retainers.
    6.  

  4.  
  5. Install the quarter ventilation louver and molding. Install the roof side inner garnish and assist grip.
  6.  
  7. Install the center pillar inner garnish and quarter trim panel.
  8.  
  9. Install the front and rear shoulder belt anchor and guides, torquing the retainers to 32 ft. lbs. (43 Nm).
  10.  
  11. Install the remaining parts to complete installation.
  12.  

 
label.common.footer.alt.autozoneLogo