Toyota Celica 1986-1993 Repair Guide

Brake Lever

Print

REMOVAL & INSTALLATION




CAUTION
On vehicles equipped with an air bag system, work must be started at least 90 seconds after the ignition switch is turned to the lock position and the negative battery cable is disconnected.

  1. Remove the parking brake lever console box.
  2.  
  3. Remove the retainer nut located on the top of the lever shaft. Disconnect the electrical connector, if equipped.
  4.  
  5. Remove the retaining bolts in the lower bracket and remove the mechanism from the vehicle. Raise and safely support the vehicle as required.
  6.  
  7. Installation is the reverse of the removal procedure. Adjust the parking brake cable after installation.
  8.  

 
label.common.footer.alt.autozoneLogo