Toyota Celica 1986-1993 Repair Guide

Rear Output Shaft Seal

Print

REMOVAL & INSTALLATION



The following procedure can be accomplished while the transfer unit is in the vehicle.

  1. Drain the transaxle oil.
  2.  
  3. Remove the propeller shaft (See Propeller Shaft in this section).
  4.  
  5. Drive out the output shaft oil seal using sst 09308-00010.
  6.  

To install:

  1. Drive in a new seal using sst 09325-20010 to a depth of 0.043-0.075 in. (1.1-1.9mm).
  2.  
  3. Install the propeller shaft and fill the transaxle with the proper lubricant.
  4.  



Click image to see an enlarged view

Fig. Fig. 1 Replacing transfer unit extension housing oil sealCelica

 
label.common.footer.alt.autozoneLogo