Toyota Celica 1994-1998 Repair Guide

General Information


The ECM contains a built-in, self-diagnosis system which detects troubles within the engine signal network. Once a malfunction is detected, the Malfunction Indicator Lamp (MIL), located on the instrument panel, will light.

By analyzing various signals, the ECM detects system malfunctions related to the operating sensors. The ECM stores the failure code associated with the detected failure until the diagnosis system is cleared.

The MIL on the instrument panel informs the driver that a malfunction has been detected. The light will go out automatically once the malfunction has been cleared.


See Figure 1

The DLC1 is located in the engine compartment. The DLC3 is located in the interior of the vehicle, under the driver's side dash.

Click image to see an enlarged view

Fig. Fig. 1: The Data Link connector 1 (DLC1) is located in the engine compartment near the firewall