Toyota Celica, Corolla, ECHO & MR2 1999-05

Removal & Installation

Print

  1. Remove the glove box assembly.
  2.  
  3. Disconnect the connector from the blower motor.
  4.  
  5. Remove the 3 screws and the blower motor.

    Click image to see an enlarged view

    Fig. Removal and installation of the blower motor

  6.  

To install:

  1. Replace the blower motor and the three screws.
  2.  
  3. Connect the electrical connector.
  4.  
  5. Replace the glove box assembly.
  6.  

  1. Remove the instrument panel.
  2.  
  3. Remove the cooling unit.
  4.  
  5. Remove the nut and disconnect the ABS ECU from its position.
  6.  
  7. Disconnect the blower motor connector.
  8.  
  9. Remove the two nuts, a bolt and the blower unit.
  10.  

To install:

  1. Install the blower unit with the two nuts and a bolt.
  2.  
  3. Install the ABS ECU with the bolt to the reinforcement.
  4.  
  5. Connect the blower motor connector.
  6.  
  7. Install the cooling unit.
  8.  
  9. Install the instrument panel.
  10.  

 
label.common.footer.alt.autozoneLogo