Toyota Celica, Corolla, ECHO & MR2 1999-05

Adjustment

Print

Air Mix Cable



  1. Disengage the control cable from the lever at the heater/cooling unit end of the cable.
  2.  



Click image to see an enlarged view

Fig. Adjusting the air mix damper control cable

  1. Set both the air mix door and the control panel to the COOL position. Then, slide the control cable through the adjusting clip until the eyelet on the cable end can be engaged to the lever. Make sure the cable is secured in the clamps.
  2.  
  3. Move the control levers left and right and check for stiffness or binding through the full range of the levers.
  4.  
  5. Test the control cable operation.
  6.  

Water Control Valve



  1. Disengage the adjusting clip.
  2.  



Click image to see an enlarged view

Fig. Adjusting the water control valve cable

  1. Place the water valve lever on the COOL position while pushing the outer cable in the COOL direction. Clamp the outer cable to the water valve bracket with the adjusting clip.
  2.  
  3. Move the control levers left and right and check for stiffness or binding through the full range of the levers.
  4.  
  5. Test the control cable operation.
  6.  

 
label.common.footer.alt.autozoneLogo