Toyota Celica, Corolla, ECHO & MR2 1999-05

Adjustment

Print

Adjusting the parking brake cables can be done from inside the vehicle.

  1. Pull the parking brake lever all the way up and count the number of clicks. The correct number of clicks should be 4-7.
  2.  



Click image to see an enlarged view

Fig. Pull the parking brake lever all the way and count the clicks

Before adjusting the parking brake, make sure the rear shoe clearance has been adjusted. for shoe clearance adjustment, refer to the procedure later in this section.

  1. Remove the console box.
  2.  
  3. Loosen the locknut and turn the adjusting nut until the lever travel is correct.
  4.  



Click image to see an enlarged view

Fig. Loosen the locknut and tune the adjusting nut until the lever travel is correct

  1. Tighten the locknut to 48 inch lbs. (5 Nm).
  2.  
  3. Install the console box.
  4.  

 
label.common.footer.alt.autozoneLogo