Toyota Celica/Supra 1971-1985 Repair Guide

Rear Stabilizer Bar

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Position the cushions and retainers on the link as shown

  1. Remove the stabilizer bar brackets.
  2.  
  3. Remove the nuts, cushions and links holding both sides of the stabilizer bar from the suspension arm. Remove the stabilizer bar.
  4.  

To install:
  1. Assemble the stabilizer link sub-assembly and install the link to the arm.
  2.  
  3. Install the stabilizer bar to the link as illustrated.
  4.  
  5. Install the stabilizer bar bracket to the differential support member.
  6.  

 
label.common.footer.alt.autozoneLogo