REMOVAL & INSTALLATION
See Figures 1, 2, 3, 4, 5, 6, 7 and 8
Fig. Fig. 1: Exploded view of the door panel mounting-1971-75 models shown
Fig. Fig. 2: Exploded view of the door trim panel and window regulator components-1982-85 models
Fig. Fig. 3: Some models have a cap covering the armrest screws
Fig. Fig. 4: Remove the mounting screws securing the armrest ...
Fig. Fig. 5: ... the door handle bezel ...
Fig. Fig. 6: ... and the lower door trim
Fig. Fig. 7: After disengaging the retaining clips, pull the panel from the door shell
Fig. Fig. 8: On power window and/or lock models, unplug the connector
Remove the door inside handle and armrest.
Remove the regulator handle snapring.
Remove the door courtesy light, if so equipped.
Remove the door trim retaining screws.
Loosen the door trim by prying between the retainers and the door trim.
Disconnect the power window switch (if equipped), and remove the door panel.
Installation is the reverse of removal.