Toyota Celica/Supra 1971-1985 Repair Guide

Shift Lever

Print

REMOVAL & INSTALLATION



  1. Unscrew the shifter knob.
  2.  
  3. Remove the console box if necessary.
  4.  
  5. Remove the boot retainer mounting screws.
  6.  
  7. Lift the bezel up and over the shifter shaft.
  8.  
  9. Pull the boot up the shaft.
  10.  
  11. Press down on the shift lever cap and rotate it counterclockwise to remove.
  12.  
  13. Put out the shift lever.
  14.  

To install:
  1. Apply multi-purpose grease to the tip of the shift lever.
  2.  
  3. Insert the lever into the transmission housing.
  4.  
  5. Push down onto the retainer and with a clockwise motion, turn the shaft to lock into position.
  6.  
  7. Lower the boot over the shaft into place.
  8.  
  9. Install the boot retainer retainer over the unit.
  10.  
  11. Tighten the mounting screws. Place the carpeting over the unit.
  12.  
  13. Install the shifter knob.
  14.  

 
label.common.footer.alt.autozoneLogo