Toyota Corolla 1970-1987 Repair Guide

Bumpers

Print

REMOVAL & INSTALLATION



This is a general procedure for front and rear bumpers assemblies-modify the service steps as necessary for your vehicle

  1. If necessary to ease access, raise and safely support the vehicle.
  2.  
  3. Disengage all electrical connections at the bumper assembly.
  4.  
  5. Remove the bumper retainers, then remove the bumper assembly. Be careful as these are often heavy components. Remove the shock absorbers from the bumper as necessary.
  6.  

The shock absorber is filled with a high pressure gas and should not be disassembled

  1. Install shock absorber and bumper assemble in the reverse order of the removal. Align the bumper assemblies for the correct fit as necessary.
  2.  

 
label.common.footer.alt.autozoneLogo