Toyota Corolla 1970-1987 Repair Guide
Front Wiper Linkage
REMOVAL & INSTALLATION
Remove the windshield wiper motor as previously outlined.
Loosen the wiper arm retaining nuts and remove the arms.
Unfasten the large wiper pivot retaining nuts and remove the linkage assembly through the access hole.
Place the linkage through the access hole and line up the pivots in their holes.
Install the two large pivot retaining nuts onto the pivots. Before final tightening, make sure the linkage is aligned in all its holes.
Reinstall the wiper motor. Check wiper system for proper operation.