Toyota Corolla 1988-1997 Repair Guide

Rear Stabilizer Bar

Print

REMOVAL & INSTALLATION



  1. Remove all necessary components to gain access for removal and installation of stabilizer bar. Remove the stabilizer bar brackets.
  2.  
  3. Remove the nuts, cushions and links holding both sides of the stabilizer bar from the suspension arms. Remove the stabilizer bar.
  4.  

To install:
  1. Assemble the stabilizer link sub-assembly and attach the link to the arm.
  2.  
  3. Install the stabilizer bar to the link.
  4.  
  5. Attach the stabilizer bar bracket to the differential support member and tighten to 27 ft. lbs.
  6.  
  7. Install all necessary components that were removed for removal access of stabilizer bar.
  8.  

 
label.common.footer.alt.autozoneLogo