Toyota Corolla 1988-1997 Repair Guide

Clock

Print

REMOVAL & INSTALLATION



See Figure 1

On some models the clock is built into the radio assembly and cannot be removed separately. On all other models proceed with the following.



Click image to see an enlarged view

Fig. Fig. 1: The digital clock is activated when the ignition key is in the ON or ACC position

  1. Disconnect the negative battery cable.
  2.  
  3. Using a small prytool, pry the clock loose from the dash panel. The clock is usually held in the dash panel by 2 small retaining clips.
  4.  
  5. Disconnect the electrical wiring from the rear of the clock and remove the clock.
  6.  
  7. Installation is the reverse of the removal procedure. Check the clock functions for proper operation. Reset the clock.
  8.  

 
label.common.footer.alt.autozoneLogo