Toyota Corolla 1988-1997 Repair Guide

Gauges

Print

REMOVAL & INSTALLATION



Disconnect the negative battery cable.

  1. Remove the combination meter from the vehicle and disassemble the meter.
  2.  
  3. Remove the retaining screws and pull the gauge from the meter lens.
  4.  

To install:
  1. Attach the gauge to the combination meter. Connect the wiring harness to the assembly.
  2.  
  3. Insert the combination meter into the dash.
  4.  
  5. Connect the negative battery cable.
  6.  
  7. Check for proper operation.
  8.  

 
label.common.footer.alt.autozoneLogo