Toyota Corolla 1988-1997 Repair Guide

Rear Window Wiper/Washer Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. From under the dash, disconnect wiring from the switch assembly.
  4.  
  5. Pull the switch from the panel.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The rear wiper switch is located in the dash

To install:
  1. Insert the switch into the dash.
  2.  
  3. Connect the wiring to the back of the switch.
  4.  
  5. Connect the negative battery cable.
  6.  
  7. Check system for proper operation.
  8.  

 
label.common.footer.alt.autozoneLogo