Log In
Search suggestions

    My Vehicles

    2001 Honda Accord DX 2.3L MFI 4cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 9:00 PM today

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Toyota Corolla 1988-1997 Repair Guide

    Inside Rear View Mirror

    Print

    REMOVAL & INSTALLATION



    The inside mirror is held to its bracket by screws. Usually these are covered by a colored plastic housing which must be removed for access. These covers can be stubborn; take care not to gouge the plastic during removal.

    Once exposed, the screws are easily removed. The mirror mounts are designed to break away under impact, thus protecting your head and face from serious injury in an accident.

    See Figures 1 and 2



    Click image to see an enlarged view

    Fig. Fig. 1: Carefully pry off the cover to exposed the screws

    Reassembly requires only common sense (which means you can do it wrong-pay attention); make sure everything fits without being forced and don't overtighten any screws or bolts.



    Click image to see an enlarged view

    Fig. Fig. 2: Remove the retaining screws, then lower the mirror

     
    AutoZone Logo