Toyota Corolla 1988-1997 Repair Guide

Seats

Print

REMOVAL & INSTALLATION



See Figures 1 through 10

Refer to the necessary illustrations for removal and installation service procedures of the seat for your vehicle. Most front seats are mounted by seat track retaining bolts. Remove the bolts and lift the seats out of the vehicle. Tighten the front seat retaining bolts to 22-32 ft. lbs. (29-43 Nm). Some seat belt and trim disassembly may be required on certain models. On models where the rear seat cushion lower mounting is retained by clips, pull the front left and right levers forward and pull up the rear seat cushion.



Click image to see an enlarged view

Fig. Fig. 1: Front seat mounting-1988-92 models



Click image to see an enlarged view

Fig. Fig. 2: Front seat mounting-1993-97 models



Click image to see an enlarged view

Fig. Fig. 3: Rear seat mounting-sedan



Click image to see an enlarged view

Fig. Fig. 4: Rear seat mounting-coupe



Click image to see an enlarged view

Fig. Fig. 5: Rear seat mounting-wagon



Click image to see an enlarged view

Fig. Fig. 6: Rear seat mounting-split seat with child seat



Click image to see an enlarged view

Fig. Fig. 7: To remove the lower seat cushion, pull out the tab ...



Click image to see an enlarged view

Fig. Fig. 8: ... then pull the lower seat out



Click image to see an enlarged view

Fig. Fig. 9: On the upper seat back, unbolt the assembly ...



Click image to see an enlarged view

Fig. Fig. 10: ... and remove the upper seat back

 
label.common.footer.alt.autozoneLogo