Toyota Corolla 1988-1997 Repair Guide

High Mounted Stoplight

Print

REMOVAL & INSTALLATION



See Figure 1 through 6



Click image to see an enlarged view

Fig. Fig. 1: Removing and installing the third brake light clips

  1. Remove the high mounted stoplight cover by pressing the center portion of the clip in while removing it.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Push the third brake light cover retaining pin in to remove



Click image to see an enlarged view

Fig. Fig. 3: Be careful when removing the clip, they break easily



Click image to see an enlarged view

Fig. Fig. 4: Pull the trim cover off the brake lamp assembly

  1. Remove the bulb from the high mounted stoplight holder.
  2.  



Click image to see an enlarged view

Fig. Fig. 5: Push the clip on the one side to release the socket assembly



Click image to see an enlarged view

Fig. Fig. 6: Remove the bulb and replace it if necessary

To install:
  1. Insert a new bulb into the lamp socket.
  2.  
  3. Before installing the retaining clips, position the center of the clip correctly.
  4.  
  5. Attach the lens cover.
  6.  

 
label.common.footer.alt.autozoneLogo