Toyota Corolla 1988-1997 Repair Guide

Low Oil Pressure Warning Sensor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Separate the electrical connector from the sensor.
  4.  
  5. Remove the sensor from the engine.
  6.  

To install:
  1. Place a small amount of clean engine oil on the threads of the sensor and carefully insert and secure the unit.
  2.  
  3. Attach the electrical wiring to the sensor.
  4.  
  5. Connect the negative battery cable. Check the oil level and add fluid as needed.
  6.  
  7. Reset any digital equipment such as radio memory and the clock if necessary.
  8.  

 
label.common.footer.alt.autozoneLogo