Toyota Corolla 1988-1997 Repair Guide

Rear Output Shaft Seal

Print

REMOVAL & INSTALLATION



The following procedure can be accomplished while the transfer case is in the vehicle.

  1. Drain the transaxle oil.
  2.  
  3. Remove the propeller shaft.
  4.  
  5. Drive out the output shaft oil seal using SST 09308-00010.
  6.  

To install:
  1. Drive in a new seal using SST 09325-20010 to a depth of 0.043-0.075 inch (1-2mm).
  2.  
  3. Install the propeller shaft and fill the transaxle with the proper lubricant.
  4.  

 
label.common.footer.alt.autozoneLogo