Toyota Corolla 1988-1997 Repair Guide

Transfer Vacuum Actuator

Print

REMOVAL & INSTALLATION



Only the All-Trac models are equipped with a transfer case.

  1. Remove and tag the 4 vacuum hoses from the actuator.
  2.  
  3. Remove the stiffener center plate and the actuator bracket bolts and then remove the actuator.
  4.  

To install:
  1. Install the transfer vacuum actuator, tightening the 3 bolts, then install the stiffener center plate and actuator bracket bolts and tighten to 27 ft. lbs. (37 Nm).
  2.  
  3. Reinstall the vacuum hoses in their proper positions.
  4.  

 
label.common.footer.alt.autozoneLogo