Toyota Cressida/Corona/Crown/MarkII 1970-1982 Repair Guide

Adjustments

Print

PEDAL HEIGHT





Click image to see an enlarged view

Fig. Fig. 1 Clutch pedal adjustment



Click image to see an enlarged view

Fig. Fig. 2 Typical clutch release cable adjustment



Click image to see an enlarged view

Fig. Fig. 3

Adjust the pedal height to the specification given in the following chart, by rotating the pedal stop (nut).

FREE-PLAY





Click image to see an enlarged view

Fig. Fig. 4 Release (slave) cylinder free-play is the distance between the arrows



Click image to see an enlarged view

Fig. Fig. 5

  1. Adjust the clearance between the master cylinder piston and the pushrod to the specifications given in the Clutch Pedal Free-play Adjustments chart. Loosen the pushrod locknut and rotate the pushrod while depressing the clutch pedal lightly with your finger.
  2.  
  3. Tighten the locknut when finished with the adjustment.
  4.  
  5. Adjust the release cylinder free-play by loosening the release cylinder pushrod locknut and rotating the pushrod until the specification in the chart is obtained.
  6.  
  7. Measure the clutch pedal free-play after performing the above adjustments. If it fails to fall within specifications, repeat Steps 1-3 until it does.
  8.  

 
label.common.footer.alt.autozoneLogo