Toyota Cressida/Corona/Crown/MarkII 1970-1982 Repair Guide

Flywheel and Ring Gear

Print

REMOVAL & INSTALLATION



  1. Remove the transmission, if the engine is installed in the car.
  2.  
  3. Remove the clutch assembly, if equipped.
  4.  
  5. Remove the flywheel.
  6.  
  7. To install, use new flywheel bolts. Tighten the bolts in a crisscross pattern to the torque specified in the chart in this section.
  8.  

 
label.common.footer.alt.autozoneLogo