REMOVAL & INSTALLATION
Fig. Fig. 1 Exploded view of common front door lock and handle mechanisms-Crown shown
Fig. Fig. 2 Exploded view of a common rear door lock and handle mechanism
Fig. Fig. 3 Exploded view of common door lock cylinder assemblies
Remove the inside door trim panel and access cover.
Disconnect the links from the outside handle and door lock cylinder.
On models with power locks, it will be necessary to unplug the connectors from the door lock solenoid and key unlock switch.
Remove the door lock retaining bolts or screws and remove the door lock.
Installation is the reverse of removal.