Toyota Cressida/Corona/Crown/MarkII 1970-1982 Repair Guide

Control Cables

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Common heater control cable routing-1971-72 Corona shown

  1. Remove the control assembly from the dash.
  2.  
  3. Tag and remove the cables from the back of the control assembly.
  4.  
  5. Disconnect the cable from the component it is attached to,
  6.  

To install:

  1. Attach the cable to its appropriate location in the back of the control assembly. Then route it to the appropriate component. Adjust the able is necessary.
  2.  
  3. Check for proper operation.
  4.  

 
label.common.footer.alt.autozoneLogo