Toyota Cressida and Van 1983-1990

Rear Stabilizer Bar

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Exploded view of the rear stabilizer bar on the IRS system-Cressida

  1. Raise and support the vehicle safely.
  2.  
  3. Remove the stabilizer bar link retaining nuts, stabilizer bar mounting bushing along with the bracket and stabilizer bar.
  4.  
  5. Installation is the reverse order of the removal procedure. Tighten the stabilizer bar link retaining nuts to 43 ft. lbs. (58 Nm) and tighten the stabilizer bushing bracket bolts to 26 ft. lbs. (35 Nm).
  6.  

 
label.common.footer.alt.autozoneLogo