Toyota Cressida and Van 1983-1990

Solenoid Resistor

Print

TESTING



Cressida


Click image to see an enlarged view

Fig. Fig. 1 Measure the resistance of the terminals in the solenoid resistor harness-Cressida



Click image to see an enlarged view

Fig. Fig. 2 Solenoid resistor wiring schematic-Cressida



Click image to see an enlarged view

Fig. Fig. 3 Measure the resistance of the terminals in the solenoid resistor harness-Van



Click image to see an enlarged view

Fig. Fig. 4 Solenoid resistor wiring schematic-Van

  1. Disconnect the wiring. Using an ohmmeter, measure the resistance between +B and the other terminals.
  2.  
  3. The resistance should be 2 omega at each terminal.
  4.  
  5. If the resistance is not as specified, replace the solenoid.
  6.  

Van
  1. Disconnect the wiring. Using an ohmmeter, measure the resistance between +B and the other terminals.
  2.  
  3. The resistance should be 2-3 omega at each terminal.
  4.  
  5. If the resistance is not as specified, replace the solenoid.
  6.  

 
label.common.footer.alt.autozoneLogo