Toyota Cressida and Van 1983-1990

Rear Wiper Switch

Print

REMOVAL & INSTALLATION



If equipped with a rear wiper switch, it is usually located in the center of the dash area.

  1. Disconnect the negative battery cable.
  2.  
  3. Using a small prytool, pry the rear wiper switch loose from the dash panel. The switch is usually held to the dash panel by 2 small retaining clips.
  4.  
  5. Disconnect the electrical wiring from the rear of the switch and remove the switch.
  6.  
  7. Installation of the rear wiper switch is the reverse of the removal procedure. Check the switch functions for proper operation.
  8.  

 
label.common.footer.alt.autozoneLogo