Toyota Cressida and Van 1983-1990

Vacuum Diagrams

Print

Following are vacuum diagrams for most of the engine and emissions package combinations covered by this guide. Because vacuum circuits will vary based on various engine and vehicle options, always refer first to the vehicle emission control information label, if present. Should the label be missing, or should vehicle be equipped with a different engine from the vehicle's original equipment, refer to the diagrams below for the same or similar configuration.

If you wish to obtain a replacement emissions label, most manufacturers make the labels available for purchase. The labels can usually be ordered from a local dealer.



Click image to see an enlarged view

Fig. Fig. 1 There is a vacuum hose routing sticker located in the engine compartment-Van shown



Click image to see an enlarged view

Fig. Fig. 2 The emission control label is also located in the engine compartment-Van shown



Click image to see an enlarged view

Fig. Fig. 3 Vacuum hose routing and component location-1983-84 Cressida



Click image to see an enlarged view

Fig. Fig. 4 Vacuum hose routing and component location-1985-88 Cressida



Click image to see an enlarged view

Fig. Fig. 5 Vacuum hose routing and component location-1989-90 Cressida



Click image to see an enlarged view

Fig. Fig. 6 Vacuum hose routing and component location-1983-84 Van



Click image to see an enlarged view

Fig. Fig. 7 Vacuum hose routing and component location-1985-89 Van

 
label.common.footer.alt.autozoneLogo